Torque Tables for BMW F650 (Not GS)			* HIGHLY Recommended, to avoid Stripping Thread
All values are in Nm. 100 Nm equals 73.76 ft.lbs.			DISCLAIMER: WHILE EVERY EFFORT HAS BEEN MADE TO
(Approx.) Note:			MAKE SURE THESE VALUES ARE CORRECT, ULTIMATELY YOU
*1 = Loctite 243			USE THESE AT YOUR OWN RISK!
*2 = Loctite 648			You are also advised to buy the ($$$) BMW Maintenance Manual
ENGINE	Torque (N.m)		FRONT WHEEL FORK	Torque (N.m)
Freewheel	10		Screw plug	25
Oil pump cover *1	6		Fork Oil drain plug	6
Screw connection on engine housing	10		Securing screw for damper	25
Double drive gear on crankshaft *1	180		Clamping screw, top of fork bridge	25
Coupling member *1	140		Clamping screw, bottom of fork bridge	25
Pressure plate	10		Slotted nut	Free of play
Clutch cover	10		Locknut (Chain Gang recommends Blue Loctite)	40
Magnetabe *1	180		STEERING
Sensor	6		Clamping screw to multi-function switch	5
Ignition cover	8		Clamping screws to clutch fitting	12
Cylinder	10		Clamping screws to brake fitting	12
Collar nut, cylinder head	50		Brake line	7
Collar screws, cylinder head	30		Clamping screws to handlebar mount	25
Fillster head screws (chain shaft)	10		Nuts to handlebar mount	10
Camshaft carrier	10		Locknuts to handlebar mount	50
Sprocket wheels on camshaft *2	50		Slotted nut	Free of play
Chain guide on camshaft carrier *1	10		Locknut (Chain Gang recommends Blue Loctite)	40
Screw connection on chain tensioner	40		Clamping screws to fork bridge	25
Valve cover	10		REAR WHEEL DRIVE
Fillster head screw (bore for locating pin)	24		Spring strut to frame	50
Retaining valve	24		Spring strut to deflection lever	30
Oil filter cover	10		Adjustment device to frame	25
Drain plug, oil tank	10		Swinging-fork pivot	100
Oil pressure valve	24		Tension strut to swinging fork	50
Oil retaining ring	24		Tension strut to deflection lever	80
Drain plug, engine ( But use 20-25 Nm * )	40		Deflection lever to frame	50
ENGINE ELECTRICAL SYSTEM			BRAKES
Magnetabe *1	180		Air line to support bracket	2
Magnetic wheel on hub *2	10		Brake support bracket to sliding tube	50
Freewheel cover on hub *2	10		Brake line to calliper	7
Sensor	6		Brake hose to handbrake cylinder	7
Engine housing cover, right	10		Brake line to foot brake cylinder	7
CARBURETTOR			Brake disc to front wheel	12
Intake connection on cylinder head	10		Brake disc to rear wheel	12
RADIATOR			Foot brake pedal to frame	25
Engine housing cover, left of engine housing	10		Foot brake cylinder to frame	12
Cover for water pump	10		Locknut, adjusting screw foot brake cylinder	12
Thermostat housing on cylinder	6		WHEELS AND TIRES
Thermostat cover	6		Clamping screws, front half axle	12
Temperature sensor in thermostat cover	15		Screw fitting, front half axle	80
Thermoswitch in thermostat housing	35		Screw fitting, rear half axle	100
EXHAUST			FRAME
Cover on silencer	12		License plate bracket on frame	5
Exhaust manifold on cylinder head	10		Rear mudguard on frame	7
CLUTCH			Governor on rear mudflap	5
Coupling member *1	140		Trim support bracket to frame	12
Pressure plate	10		Prop stand	10
Engine housing cover, left	10		Locknut on propstand	25
DRIVE CHAIN			EQUIPMENT
Cover for chain pinion	5		Retaining screw on ignition lock	25
Chain sprocket to chain sprocket support bracket	25		Tear-off screw	To tear point
Hexagon nut	100		Retaining screws on saddle lock	12
Roller to brake lever	25		INSTRUMENTS
Roller to frame	25		Instrument cluster on fairing bracket	8
Refer the Vibrations FAQ for Frame/Engine Mounting Bolt Torques
Please read the Disclaimer before attempting any work in this FAQ